ABRASIVE RECYCLING SYSTEM COMBINATIONS

ABRASIVE RECYCLING SYSTEM COMBINATIONS

  • Product Category: GRANÜL GERİ DÖNÜŞÜM SİSTEMLERİ

The abrasive recycling combinations that can be used in our Sandblasting Cabins are as follows;

Scraper + Spiral + Elevator + Seperator + Silo
Scraper + Scraper + Elevator + Seperator + Silo
Spiral + Elevator + Seperator + Silo
Scraper + Spiral + Vacuum Machine + Silo
Scraper + Scraper + Vacuum Machine + Silo

In order to use the Elevator + Seperator combination, it is necessary to excavate the ground. If you do not want to dig on the ground, you should choose a Vacuum Machine.
Under normal conditions, scraper and spiral systems are also placed in the pit opened to the ground. However, if it is not possible to excavate the ground, an raised sandblasting cabin can be designed by placing these carrier systems on a steel chassis. 
A ramp can be built in front of the sandblasting room to insert forklifts or similar carrier vehicles into the blasting room.
If a ceiling crane is used for material entry, a pneumatic door can be built on the ceiling.
In order to save costs, conveyor systems such as scraper and screw conveyor can be placed on the floor of the blasting room, along an edge or along the rearmost edge, instead of cover the entire floor. 
Or, granule recycling can only be achieved by manually sweeping the vacuum machine or elevator separator group.
 

Product Gallery