ALUMINUM AGING OVENS

Aging Furnace: It is the furnace where the precipitation hardening of the profiles drawn in the extrusion line, in other words, the aging process.

Aluminum profiles are loaded into the furnace by means of a loading car.

Profiles that are kept in the oven at 185 ° C for 6-8 hours get hardened by going through the aging process.

The whole operation is programmed with the PLC control unit.

It is very safe thanks to its safety guard guillotine door.

The heating system is a indirect heating system.

Heating unit; It is at the rear in single-door ovens, on the side and in the middle of the oven in two-door ovens, and can be placed on the oven when necessary. The hot air is blown between the profiles over the specially designed oven door, and the heat is distributed homogeneously.

The furnace floor is manufactured in such a way that a single trolley can enter directly without the need for a carriage.

Production of furnaces of various sizes and lengths suitable for demand and purpose is possible within the required engineering calculations.